Seleziona un paese o un'area geografica diversi per visualizzare i contenuti per la tua posizione.
Stati Uniti
12:41:22 GMT+0000 (Coordinated Universal Time)
LTS25-160-1610-MM-1
Linear table
Spesso acquistati insieme
Main Dimensions & Performance Data
| H | 66 mm | Total Height |
| B1 | 160 mm | Total Width |
| L | 160 mm | Length of carriage |
Mounting dimensions
| D7 | 25 mm | Tolerance h7 |
| D8 | 6,6 mm | |
| H1 | 51 mm | Height of carriage |
| H12 | 14 mm | |
| JB43 | 140 mm | |
| jB8 | 42 mm | |
| jL8 | 120 mm | |
| K43 | M8 | |
| Ltot | 4.400 mm | Maximum length |
| Rx | 88,6 mm | |
| S | 10 mm | Safety distance |
| S | 11 mm | |
| T8 | 6,1 mm | |
| t43 | 22 mm | Depth of Thread |
| t87 | 15 mm | Depth of Thread |
| BB | 21 mm | Length of Bellows Fastener |
| FBL | 1,34 mm | Effective length factor of bellow |
| b87 | 64 mm | Tolerance ±0,2 |
| d85 | 9 mm | Diameter drive shaft, Tolerance h7 1 |
| d86 | 52 mm | Tolerance g7 |
| G4 | M12 | Thread |
| G5 | M12 | Thread |
| G87 | M6 | Thread |
| G43 | M10 | Thread |
| h5 | 26 mm | |
| h85 | 36 mm | |
| h87 | 38 mm | Tolerance ±0,2 |
| JL43 | 140 mm | |
| jB4 | 132 mm | |
| JL4 | 12,5 mm |
Dimensions
| H7 | 6 mm | |
| h1 | 30 mm | |
| L4 | 33 mm | Length of Shaft Support Block with Drive System |
| L5 | 25 mm | Length of Shaft Support Block without drive System |
| L88 | 34,5 mm | |
| L86 | 7 mm | |
| Rz | 88 mm | |
| H5 | 52 mm | Height of Shaft Support Blocks |
Technical data
| vmax | 0,75 m/s | Maximum Speed |
| amax | 10 m/s2 | Maximum Acceleration |
| d0 | 16 mm | Spindle Diameter |
| P | 10 mm | Spindle Pitch |
| mLAW | 2,9 kg | Mass of Carriage |
| Is | 0,321 kg*cm2 | Mass moment of inertia of threaded Spindle |
| CI | 7.520 N | Load direction I: compressive load |
| C0I | 9.200 N | Load direction I: compressive load |
| CII | 4.550 N | Load direction II: tensile load |
| C0II | 6.000 N | Load direction II: tensile load |
| CIII | 6.930 N | Load direction III: lateral load |
| C0III | 8.200 N | Load direction III: lateral load 2 |
| C | 15.400 N | Load capacity Spindle Nut dyn 3 |
| C0 | 26.500 N | Load capacity Spindle Nut stat 4 |
| Ca | 13.400 N | Load capacity fixed Spindle bearing dyn |
| C0a | 18.800 N | Load capacity fixed Spindle bearing stat |
| M0x | 240 Nm | Max. permissible static moment per Carriage 4 |
| M0y | 312 Nm | Max. permissible static moment per Carriage 4 |
| M0z | 240 Nm | Max. permissible static moment per Carriage 4 |
Additional information
6 Nm | Max. permissible drive torque | |
ZKLN1034.2RS-PE | Rolling Bearings | |
0,05 mm | Repeat Accurancy ± | |
0,321 kg*cm2 | Mass moment of inertia of threaded Spindle | |
KBO25-PP-AS | Bearing 2 |
Temperature range
| min | 0 °C | Minimum operating Temperatur |
| max | 80 °C | Maximum operating Temperatur |
Note a piè di pagina
1
Thread witness marks may be present on the pin.
2
Design of linear ball bearing guidance systems: see Catalogue WF1, Shaft Guidance Systems.
3
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
4
These values apply if load is evenly distributed over all four linear ball bearings. The values are single loads and apply when the shaft and support rail units are fully supported. These must be reduced for combined loads. For design criteria of the linear guidance system, see Catalogue WF1, Shaft Guidance Systems.
Download:
Attuale variante del prodotto
| Size code | 25 | |
| Drive type | KGT | Ball screw drive |
| Length of carriage | 160 | 160 mm |
| Spindle diameter | 16 | 16mm |
| Spindle pitch | 10 | 10 mm |
| Spindle nut design | MM | Double cylinder nut |
| Bellow | 1 | Yes |
