Select a different country or region to see content for your location.
United States
15:19:34 GMT+0000 (Coordinated Universal Time)
ZARF3590-L-TV
Needle roller/axial cylindrical roller bearing
Needle roller/axial cylindrical roller bearings ZARF..-L, double direction, for screw mounting, long shaft locating washer
Preferred product
Frequently bought together
Main Dimensions & Performance Data
| d | 35 mm | Bore diameter |
| D | 90 mm | Outside diameter |
| H | 70 mm | Hight |
| Ca | 56.000 N | Basic dynamic load rating, axial |
| C0a | 148.000 N | Basic static load rating, axial |
| Cr | 26.000 N | Basic dynamic load rating, radial |
| C0r | 47.000 N | Basic static load rating, radial |
| Cua | 12.900 N | Fatigue load limit, axial |
| Cur | 6.800 N | Fatigue load limit, radial |
| nG Oil | 4.800 1/min | Limiting speed for oil lubrication |
| nG Grease | 1.700 1/min | Limiting speed for grease lubrication |
| MRL | 0,9 Nm | Bearing friction torque |
| ≈m | 1,134 kg | Weight |
Mounting dimensions
| Da max | 61 mm | Maximum diameter of housing shoulder |
| da min | 43 mm | Minimum diameter shaft shoulder |
| t1 | 0,1 mm | Position bore in the housing |
Dimensions
| H1 | 51 mm | Height outer ring over wave washer |
| C | 18 mm | Width, outer ring |
| C1 | 10 mm | Distance to lubrication hole |
| D1 | 60 mm | Rip diameter shaft washer |
| D2 | 45 mm | Heeldiameter wave washer long |
| D3 | 58 mm | Outside diameter wave washer long |
| B | 11 mm | Width, wave washer |
| B1 | 27 mm | Width wave washer long |
| B2 | 13 mm | Width heel wave washer long |
| rmin | 0,3 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| d1 | 3,2 mm | Diameter lubrication hole |
| J | 73 mm | Pitch circle diameter (holes) |
| n | 12 | Number of screwing holes |
| n x t | 30 ° | Split |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 2.600 N/µm | Rigidity axial |
| ckL | 740 Nm/mrad | Tilting stiffness |
| Mm | 3,21 kg*cm2 | Mass moment of inertia |
1 µm | Axial runout | |
| radial | ZMA35/58 | Recommended INA precision locknut for radial locking (not included) |
| axial | AM35/58 | Locknut 2 |
| MA | 40 Nm | Tightening torque nut |
12.143 N | Preload force axial | |
45X60X8 | Sealing ring | |
M6 | Screw size | |
| na | 12 | Number of screws |
| na x ta | 30 ° | Division (screwing holes) |
Downloads:
Your current product variant
| Cage | TV | Plastic Cage made from PA66 |
| Locating Feature , bearing outer ring | L | Stepped shaft locating washer extended on one side |
Characteristics
