Select a different country or region to see content for your location.
United States
21:41:29 GMT+0000 (Coordinated Universal Time)
ZARN50110-L-TV
Needle roller/axial cylindrical roller bearing
Needle roller/axial cylindrical roller bearings ZARN..-L, double direction, long shaft locating washer
Preferred product
Frequently bought together
Main Dimensions & Performance Data
| d | 50 mm | Bore diameter |
| D | 110 mm | Outside diameter |
| H | 103 mm | Hight |
| Ca | 172.000 N | Basic dynamic load rating, axial |
| C0a | 480.000 N | Basic static load rating, axial |
| Cr | 46.500 N | Basic dynamic load rating, radial |
| C0r | 103.000 N | Basic static load rating, radial |
| Cua | 44.500 N | Fatigue load limit, axial |
| Cur | 12.700 N | Fatigue load limit, radial |
| nG Oil | 3.100 1/min | Limiting speed for oil lubrication |
| nG Grease | 1.100 1/min | Limiting speed for grease lubrication |
| MRL | 3,8 Nm | Bearing friction torque |
| ≈m | 3,68 kg | Weight |
Mounting dimensions
| Da max | 96 mm | Maximum diameter of housing shoulder |
| da min | 73 mm | Minimum diameter shaft shoulder |
Dimensions
| H1 | 74,5 mm | Height outer ring over wave washer |
| C | 25 mm | Width, outer ring |
| D1 | 95 mm | Rip diameter shaft washer |
| D2 | 75 mm | Heeldiameter wave washer long |
| D3 | 93 mm | Outside diameter wave washer long |
| B | 17,5 mm | Width, inner ring |
| B1 | 38,5 mm | Width wave washer long |
| B2 | 18 mm | Width heel wave washer long |
| rmin | 0,3 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 4.600 N/µm | Rigidity axial |
| ckL | 2.900 Nm/mrad | Tilting stiffness |
| Mm | 35,3 kg*cm2 | Mass moment of inertia |
1 µm | Axial runout | |
| radial | ZMA50/92 | Recommended INA precision locknut for radial locking (not included) |
| axial | AM50 | Recommended INA precision locknut for axial locking (not included) |
| MA | 180 Nm | Tightening torque nut |
36.224 N | Required locknut force | |
75X95X10 | Rotary shaft seal to DIN 3760 (not included) |
Downloads:
Your current product variant
| Cage | TV | Plastic Cage made from PA66 |
| Locating Feature , bearing outer ring | L | Stepped shaft locating washer extended on one side |
Characteristics
