Seleziona un paese o un'area geografica diversi per visualizzare i contenuti per la tua posizione.
Stati Uniti
13:32:39 GMT+0000 (Coordinated Universal Time)
3305-BD-XL-2Z
Angular contact ball bearing
Angular contact ball bearing 33..-BD-XL-2Z, double row, X-life, shields, steel sheet metal cage
Sostituisce
3305-BD-2Z
Prodotto preferito
Informazione sul prodotto
Main Dimensions & Performance Data
| d | 25 mm | Bore diameter |
| D | 62 mm | Outside diameter |
| B | 25,4 mm | Width |
| Cr | 31.500 N | Basic dynamic load rating, radial |
| C0r | 21.000 N | Basic static load rating, radial |
| Cur | 1.460 N | Fatigue load limit, radial |
| nG | 9.300 1/min | Limiting speed |
| nϑr | 9.400 1/min | Reference speed |
| ≈m | 0,357 kg | Peso |
Mounting dimensions
| da min | 32 mm | Minimum diameter shaft shoulder |
| Da max | 55 mm | Maximum diameter of housing shoulder |
| ra max | 1 mm | Maximum fillet radius |
Dimensions
| rmin | 1,1 mm | Minimum chamfer dimension |
| D1 | 51,47 mm | Shoulder diameter outer ring |
| D2 | 53,72 mm | Caliber diameter outer ring |
| d1 | 39,5 mm | Shoulder diameter inner ring |
| d2 | 37,63 mm | Caliber diamter inner ring |
| a | 35,4 mm | Distance between the apexes of the pressure cones |
| α | 30 ° | Contact angle |
Temperature range
| Tmin | -20 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Attuale variante del prodotto
| Design variant | B | Bearing without filling slot |
| Changed internal design | D | D |
| Sealing | 2Z | Non-contact shield on both sides |
| Cage | JH | Steel sheet metal |
| Tolerance class | P6 | Class6 (P6), better than PN |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | GA14 | Ball bearing grease, low noise |
| Axial internal clearance | CN | Group N (CN) |
Caratteristiche
Prodotti visualizzati di recente
